Erdemir Relies on Danieli Technology for New Slab Inspection and Grinding Plant

Erdemir, part of Oyak Group, awarded the turnkey supply contract to Danieli Centro Maskin for a complete inspection and conditioning plant, to be installed at Zonguldak, Turkey.

It will process approximately 400,000 tpy of slabs in ultra-low, low- and medium-carbon and alloy steel grades.

The grinding plant consists of a SuperGrinder and a lateral unit for edge and corner grinding, featuring HiGrind digital system for control of grinding depth and safety functions, the E-Cube system for grinding at variable, stepless angles, and the Cast-t-Grind system for processing hot slabs up to 800 °C.

Based on acquisition and rendering of 3D images, the IntelliGrind system will ensure automatic detection and classification of surface defects by artificial intelligence and training of the neural network.

Source: Danieli Group

Poor Demand Restricts Steel Price Rises as Raw Material Costs Increase

Raw material costs put upward pressure on prices, in northern Europe, in March, but demand was insufficient to support proposed hikes. Flat products selling values, were, for the most part, unchanged, in euro equivalent terms. Regional mills have spare production capacity and delivery lead times remain short. Supply chain inventories are at a high level. Asian import offers are, in most cases, not sufficiently cheap to be attractive.

Danish domestic selling values for hot rolled coil were rolled over, from the previous month. Swedish industrial output is at a lower level than last year. Prices are quite stable. Construction activity has decreased in Finland, in recent months. Prices are unchanged, in the Netherlands, amidst customer uncertainty and subdued demand. Business activity is flat, in Norway.

Hot rolled plate consumption is steady in Austria, Sweden and Norway. Market activity is subdued, in Denmark. EU safeguard quotas are adding to buyers’ reluctance to place import orders. Finnish domestic sales are weak, and selling values slipped. Delivery lead times, from European suppliers, are very short. Buyers, in the Netherlands, note an increasingly firm stance, on prices.

European-produced cold rolled coil is plentiful and substantial shipments from Asia are expected. Selling values are unchanged, in Denmark, this month, despite the regional mills’ wishes for increases. Finnish service centres are well stocked. End-users are resistant to price increases. Austrian stockists believe that prices are at the bottom of the current cycle. Norwegian buyers are, increasingly, sourcing from third country suppliers. With no application of EU tariffs, offers from these sellers are very attractive.

Weak demand for coated sheet and coil from the automotive sector persists. Galvanised material is abundant, in Denmark, and regional mills are operating below full capacity. Market observers believe that the peak for Swedish manufacturing activity has passed. Orders from the auto supply chain remain depressed, in Finland. Buying activity, by industrial consumers, is weak, in Austria. Norwegian domestic demand is subdued.

Sales of wire rod to Swedish manufacturers are declining. Prices are unchanged from those of last month, in euro equivalent terms. Finnish consumption is fair, but pricing is tentative. Ex-mill prices rose by around €10 per tonne, in the Netherlands, this month, despite mediocre demand.

The Danish domestic market for medium sections and beams is quite stable, although supply chain participants report that significant rebates may be achieved, for large orders. The declining building sector has been a major factor in the downturn in Swedish industry, during the past year. A modest increase in Finnish domestic selling figures was agreed, this month, as a result of rising raw material costs. Construction industry participants, in the Netherlands, report a positive outlook, but current demand is subdued. Mills issued increased list prices, in March, but only small increments were agreed with purchasers.

Soaring mill input costs supported rising reinforcing bar values, in Sweden, in March. However, the effects, on the market, of the Vale mine disaster, in Brazil, are expected to subside, soon. Buyers, in the Netherlands, report offers of small parcels of Ukrainian material. Rising raw material costs led to modest increases in rebar values, in Austria. Local producers pressed for price hikes in Norway but purchasers resisted.

Many EU buyers are refraining from placing orders on UK producers of merchant bars. They are wary of the possibility of imminent post-Brexit tariffs being applied. This has the effect of tightening supply, in the region.

MEPS International Ltd is a Steel Market Analyst, tacking prices of steel products around the globe. Publishing monthly steel reviews as well as online steel price data. to find out more about MEPS visit

Source: MEPS International – European Steel Review Supplement – March 2019

European Steel Price Rises Thwarted by Lacklustre Demand

Price hikes of €30 per tonne were proposed, in mid-February, for domestic sales of strip mill products. This followed a similar announcement, in late January. The steelmakers cited strengthening raw material costs, and the limited availability and increased price of imported steel. However, European basis values were largely static in Northern Europe, in March. The producers secured small rises in Italy and Spain – reducing the differential between selling values in the north and south of the region.

The implementation of the price initiative was constrained by a number of factors. Business confidence remains weak, due to economic and political uncertainty. Service centre buyers are reluctant to commit to forward orders, given plentiful inventories and reduced levels of downstream demand. Moreover, regional mills have spare capacity, due to a substantial reduction in orders from vehicle manufacturers. Domestic delivery lead times are relatively short.

German demand remains slow, at present. With the auto sector still weak and the machine building segment sluggish, it is difficult to envisage any immediate pickup in activity. Local mills, despite their price hike announcements, are keen to secure orders. Consequently, they are prepared to be flexible during price negotiations, especially when high volume bookings are available. Import opportunities are limited. Turkish producers are uncompetitive. Indian suppliers are not offering.

Market fundamentals, for 2019, are quite weak, in France. However, activity in the steel sector, in March, looks more promising than in the previous month. Many buyers are able to negotiate stable selling values, for April delivery. Customers are reluctant to finalise orders despite price rise proposals from the mills. Those local service centres supplying the auto industry still reported strong sales, in the first two months of the year, despite forecasts for 2019 indicating a slowdown.

In Italy, the economy is entering a period of negative growth. Downstream steel demand is extremely weak. However, import price offers increased, due to cost pressures in supplying countries. This enabled Italian steelmakers to lift their domestic basis numbers, in March – thus shrinking the price differential between north and south Europe. Nevertheless, the number of actual transactions is quite low as service centres struggle to maintain their resale values. Consequently, the implementation of the mills’ target increases of €30/35 per tonne was only partially successful.

UK distributors report that demand, with the exception of auto-related sectors, is holding up, despite the uncertainties associated with Brexit. Their resale margins are tighter than of late but still acceptable. Despite steelmakers’ price hike ambitions, selling values are unchanged, this month. The pound sterling strengthened, in early March, reducing the cost of imported material. Little stock building, to ensure supply beyond Brexit, was noted.

Uncertainty persists in the Belgian market. Economic growth forecasts for 2019 are lower than previously announced. The steel sector remains rather quiet. Large service centres are carrying higher inventories than are necessary for today’s demand. Their resale margins are under pressure. No further downward movements were noted for strip mill product basis prices, this month. Buyers believe that the bottom has been reached, as domestic suppliers push for price increases. Rising price offers from overseas mills led to reduced import competition, in Spain. This enabled domestic steelmakers to propose increases on basis values for strip mill products. Buyers confirm that they had little choice but to accept rises of €10/15 per tonne, for April/early May delivery. The steelmakers continue to push for further hikes. Service centre activity is more lively than earlier in the year. However, resale values do not reflect replacement costs. Distributors hope that the mill increases will help them to recover lost margins.

MEPS International Ltd is a Steel Market Analyst, tacking prices of steel products around the globe. Publishing monthly steel reviews as well as online steel price data. to find out more about MEPS visit

Source: MEPS International – European Steel Review – March 2019

sunset behind blast furnace at evraz ntmk in Russia

Paul Wurth Blast Furnace Equipment – Long-Term Solutions for EVRAZ NTMK

LBy October 2020, EVRAZ will complete a technical upgrade of No. 6 Blast Furnace of their integrated steel works NTMK located at Nizhnij Tagil in the Urals, Russia. The modernization will concern all systems of the existing installation and enables increasing the nominal capacity by about 40% compared to the previous campaign design. With a hearth diameter of 9.8 meters and an inner volume of 2,200 cubic meters, the new furnace will be able to produce 2.5 million tons of hot metal per year.

Paul Wurth will supply the following systems to equip the furnace: a parallel-hopper type Bell Less Top (BLT®) charging system, a complete top gas cleaning plant, copper staves for the high heat-loaded areas of bosh, belly and lower stack, the complete hearth refractory lining with ceramic cup as well as, on behalf of TMT, fully hydraulic clay guns, tap hole drill and main runner cover manipulators, all for two tapholes, as well as tilting runner drive units. The technical solutions and the equipment basically repeat the technology installed at NTMK’s new No. 7 Blast Furnace which went into operation in February 2018. The BLT and the tapping machinery are going to replace competing systems, thus contributing to consolidating the leading market position of these Paul Wurth and TMT technologies.

Taking a look back into history, in 2003, it was exactly for NTMK’s that-time brand-new BF6 when Paul Wurth was awarded the first ever order from Russia for technology not related to top charging: an annular gap scrubber, copper staves and cardan-type tuyere stocks. These systems have been in operation to the full satisfaction of the customer during a full blast furnace campaign lasting for almost 14 years until EVRAZ stopped the furnace in last spring. Finally, also BF5 has been operating with a similar Paul Wurth/TMT equipment package from 2006 on up till now. With the recent orders received for the new equipment for BF6 at Nizhnij Tagil, Paul Wurth can claim the position of a truly Leading Partner for EVRAZ in technology and plant for ironmaking.

Source: Paul Wurth

North American Steel Price Rises On The Horizon

According to recent research by MEPS International Ltd, North American steel prices are expected to recover in the short term. This follows the substantial reductions recorded in the past seven months.

Attempts by steelmakers to lift prices are forecast to be gradually accepted in the market, in the coming months. A degree of inventory replenishment is anticipated. Furthermore, upward pressure on transaction values is predicted as a result of escalating costs of ferrous scrap and iron ore.

However, following the Section 232-related surge, last year, steel prices are likely to remain substantially below the peak values, recorded in that period.

Source: MEPS International News Alert

Continuous billet caster revamped by Primetals Technologies started up at Feralpi Siderurgica in Italy

  • Production capacity was increased by 10 percent to 1.2 million metric tons per year
  • Billet cross section is raised to 150 x 150 millimeters with predisposition for 160 x 160 millimeters
  • Plant availability is increased

Recently, a six-strand billet caster revamped by Primetals Technologies was started up in the Lonato del Garda works of Feralpi Siderurgica S.p.A., part of the Italian Feralpi Group. The aims of the project were to increase production capacity from 1.1 to 1.2 million metric tons of billets per year, to produce billets with a larger square cross section of 150 x 150 millimeters with predisposition for cross section of 160 x 160, millimeters, and to improve plant availability.

Before the revamp, the six-strand billet caster of Feralpi Siderurgica in Lonato del Garda in the Brescia Province, had an installed annual capacity of 1,1 million metric tons of billets with a square cross sections of 140 x 140 millimeters. It produces medium carbon, carbon and low alloyed steels for the construction industry. Within the revamping project, the casting machine was equipped with new DiaMold high-speed casting molds, characterized by tapered mold tubes and open bottom-mold corners to reduce strand friction. The DynaFlex hydraulic oscillator with online and flexible adjustment of the mold-oscillation parameters serves to improve strand-surface quality. The scope of supply included a new secondary cooling and a dummy bar head and the existing straightener has been modified according to Primetals Technologies´ model of continuous straightening to optimize the straightening strains. Primetals Technologies was responsible for the basis, detail engineering and supply of the above components.

Feralpi Group is one of the most important steel suppliers to the European construction industry. The group operates four subsidiary companies in Italy and runs production and sales locations in Europe and North Africa. Feralpi Siderurgica was founded in 1968 and is thus the oldest member of the Feralpi Group. The company is today one of the leading suppliers of reinforcing steel, wire rod, reinforcement meshes and the associated derivatives in Italy.

Continuous billet caster modernized by Primetals Technologies in the Lonato del Garda, Italy works of Feralpi Siderurgica

Primetals Technologies, Limited headquartered in London, United Kingdom is a worldwide leading engineering, plant-building and lifecycle services partner for the metals industry. The company offers a complete technology, product and service portfolio that includes integrated electrics, automation and environmental solutions. This covers every step of the iron and steel production chain, extending from the raw materials to the finished product – in addition to the latest rolling solutions for the nonferrous metals sector. Primetals Technologies is a joint venture of Mitsubishi Heavy Industries (MHI) and Siemens. Mitsubishi-Hitachi Metals Machinery (MHMM) – an MHI consolidated group company with equity participation by Hitachi, Ltd. and the IHI Corporation – holds a 51% stake and Siemens a 49% stake in the joint venture. The company employs around 7,000 employees worldwide.

Source: Primetals Technologies